Structural Calculations in Dubai
Independent, code-compliant engineering calculations by licensed consultants, stamped and ready for authority submission.
What are structural calculations in Dubai?
Structural calculations in Dubai are the engineering computations that verify a structure can safely carry all design loads. Under Dubai building regulations, structural calculations must be prepared and stamped by a UAE-licensed structural engineer before any permit can be issued by Dubai Municipality, Trakhees, JAFZA, or any developer authority. Structural Solutions provides independent structural calculations for steel, aluminum, RC, and timber structures across all Dubai authorities: accepted by DM, DDA, Trakhees, JAFZA, Emaar, Nakheel, and DAMAC.
Who needs structural calculations in Dubai?
- Who needs them: Any new structure, structural modification, extension, mezzanine addition, or change of use.
- Villa owners: Adding a pergola or canopy.
- Contractors: Building a steel mezzanine.
- Developers: Constructing new buildings.
- Registered engineer: Calculations are stamped by an authority-registered consultant.
- Loads to code: Dead, live and wind loads to the applicable codes.
- Connections designed: Fixings, base plates and connections are included.
- Existing structure checked: Where new loads are added to an existing building.
- Match the drawings: Calculations must match the drawings submitted.
Documents you will need
- Title deed (or tenancy contract plus landlord NOC for tenants)
- Owner passport and Emirates ID copy
- Affection plan / site plan
- Architectural or shop drawings of the element
- Existing structural drawings, if available
How it works
How the structural calculations process works
01
Submit drawings and project info
02
Load analysis and scope review
03
Engineering calculations and design
04
Calculation report preparation
05
Peer review and QA sign-off
06
Stamped report for authority submission
At a glance
Structural calculations in Dubai at a glance
Structural engineer
Prepares the structural design and calculations and stamps them as an authority-registered consultant.
Structural consultants →Master developer
Issues the community NOC against its design guidelines, where the community has one.
Developer approvals →Building authority
Dubai Municipality, DDA or Trakhees, depending on the community. Building permit; work starts only after it is issued.
Approval services →Our structural calculation services
What gets calculations sent back
- Calculations do not match the drawings
- Loads or connections not covered
- Stamp is not from a registered consultant
- Existing structure not checked
Guides
Questions owners ask
Structural Questions Owners Ask Us
Common structural checks we prepare stamped calculations for.
Questions Owners Ask Us
- Is the Wall Between My Apartments Load-Bearing?
- Shear Wall Assessment for Apartment Merging
- Post-Tensioned Slab Opening Assessment in Dubai
- Is My Floor Strong Enough for More Restaurant Seating?
- Restaurant Pergola Structural Calculations
- JLT Slab Load Assessment
- Can I Add a Floor to My Villa in Al Barsha?
- Heavy Kitchen Equipment Load Assessment
Questions owners ask
- What is included in a structural calculation report?
- Do I need structural calculations for a villa extension?
- Do I need structural calculations to remove a wall?
- Do I need structural calculations for a pergola?
- Do I need structural calculations for a roof water tank?
- Can my slab carry a jacuzzi or heavy equipment?
- Why were my structural calculations rejected?
- What codes are used for structural calculations in Dubai?
More questions owners ask
- How do engineers calculate the load of a rooftop pool?
- Do shade structures need wind load calculations?
- Do I need structural calculations for a staircase?
- Can an outside engineer stamp my contractor's drawings?
- Do I need a soil test for a villa extension?
- Do new columns need new foundations?
- Do I need a shoring permit in Dubai?
- Can I build a basement in my villa?
Guides
More structural calculation guides
By Calculation Type
- Timber Structure Calculations
- Foundation Calculations
- Retaining Wall Calculations
- Beam Design Calculations
- Column Design Calculations
- Slab Design Calculations
- Swimming Pool Structural Calculations
- Balcony Structural Calculations
- Roof Structural Calculations
- Staircase Structural Calculations
- Canopy Structural Calculations
- Car Shade Structural Calculations
By Authority
- Structural Calculations Dubai Municipality
- DDA Structural Calculations
- Trakhees Structural Calculations
- JAFZA Structural Calculations
- RTA Structural Calculations
By Community
- Palm Jumeirah Structural Calculations
- Arabian Ranches Structural Calculations
- The Meadows Structural Calculations
- The Springs Structural Calculations
- The Lakes Structural Calculations
- JVC Structural Calculations
- Al Furjan Structural Calculations
- Jumeirah Park Structural Calculations
- The Valley Structural Calculations
- Tilal Al Ghaf Structural Calculations
- Damac Hills Structural Calculations
- Motor City Structural Calculations
- Al Quoz Structural Calculations
- Dubai Hills Structural Calculations
By Building Type
- Commercial Building Structural Calculations
- Industrial Building Structural Calculations
- Apartment Structural Calculations
Trust & Problem Guides
Questions
Frequently asked questions
What are structural calculations in Dubai?
Structural calculations in Dubai are engineering computations verifying a structure is safe under all design loads. They are required by Dubai Municipality and all other authorities before a building permit or NOC is issued.
What do you need from me to get started?
Your plot or unit details, title deed or affection plan, any existing drawings and a short description of the works. We confirm the approvals needed and prepare the submission.
Are your reports accepted by Dubai Municipality?
Yes. All our structural calculations are accepted by Dubai Municipality, DDA, Trakhees, JAFZA, Emaar, Nakheel, DAMAC, and all major Dubai authorities.
Do you cover steel, aluminum and concrete?
Yes. We provide steel structure calculations, aluminum structure calculations, and concrete structural calculations from one licensed consultancy in Dubai.
Can you calculate villa modifications and pergolas?
Yes. We prepare structural calculations for villa bearing wall modifications, extensions, and pergola additions with full NOC support across all Dubai communities.
What information do you need to prepare structural calculations?
We typically need architectural drawings, the intended use and loading, material specifications, and any existing structural drawings for modifications.
Do you provide calculations for existing buildings, not just new ones?
Yes. We prepare structural calculations for existing buildings undergoing modification, change of use, or additional loading, as well as new construction.
Can Structural Solutions submit calculations directly to the authority on my behalf?
Yes. We manage the full submission and authority coordination alongside your architect or contractor until the calculations are approved.
Related guides
