If you already have an architect or contractor and only need engineering input, we provide calculations, reports and drawings. If you need a permit, NOC or completion certificate, we take the same files through the authority submission. You can start with engineering and move to full approvals at any time: we keep the files ready.
Structural Consultants in Dubai: Engineering and Authority Approvals in One Team
Most owners, contractors and developers end up juggling two teams: an engineer for quick calculations or site checks, and a consultant for the DM, DDA, Trakhees or Nakheel submission. At Structural Solutions you get both in one team: fast structural engineering, and full authority approvals through to the completion certificate.
Arabian Ranches
Palm Jumeirah
Dubai Hills Estate
The Meadows
The Springs
Jumeirah Islands
Emirates Hills
Mudon
The Villa
Arabian Ranches
Palm Jumeirah
Dubai Hills Estate
The Meadows
The Springs
Jumeirah Islands
Emirates Hills
Mudon
The Villa
Arabian Ranches
Palm Jumeirah
Dubai Hills Estate
The Meadows
The Springs
Jumeirah Islands
Emirates Hills
Mudon
The Villa
Arabian Ranches
Palm Jumeirah
Dubai Hills Estate
The Meadows
The Springs
Jumeirah Islands
Emirates Hills
Mudon
The Villa
Arabian Ranches
Palm Jumeirah
Dubai Hills Estate
The Meadows
The Springs
Jumeirah Islands
Emirates Hills
Mudon
The Villa
Arabian Ranches
Palm Jumeirah
Dubai Hills Estate
The Meadows
The Springs
Jumeirah Islands
Emirates Hills
Mudon
The Villa
Arabian Ranches
Palm Jumeirah
Dubai Hills Estate
The Meadows
The Springs
Jumeirah Islands
Emirates Hills
Mudon
The Villa
Arabian Ranches
Palm Jumeirah
Dubai Hills Estate
The Meadows
The Springs
Jumeirah Islands
Emirates Hills
Mudon
The Villa
Streamlined
Approval process
End-to-end
NOC to permit, managed
Direct access
To your project team
Always on
Client support
Why Structural Engineering in Dubai Is Different
Dubai works are regulated by Dubai Municipality, DDA, Trakhees and master developers such as Nakheel. Each asks for structural calculations, stamped drawings and an NOC or completion certificate. Even a simple wall removal or pergola often needs a site inspection, load checks, reinforcement design and a portal submission.
How We Work
01
Site Inspection and Brief
02
Load Checks and Feasibility
03
Structural Design and Calculations
04
Stamped Drawings (DWG and PDF)
05
Authority Submission (DM, DDA, Trakhees, Nakheel)
06
Completion Certificate and Handover
How Our Approval Process Works
Our expert engineers handle the entire NOC process, ensuring faster approvals and full compliance with Dubai regulations.
Engineering Only, or Full Approvals?
Typical Projects We Handle
Wall Removal
Pergola and Shade
Villa Extension
Steel Platform
Mezzanine
As-Built Drawings
Structural Consultants in Dubai: The Short Answer
| What you need | What we provide | Ideal for |
|---|---|---|
| Engineering only | Calculations, feasibility checks, structural reports and drawings | Urgent jobs, concept design, small works, or when you already have an architect or contractor |
| Full authority approvals | Stamped drawings, submission to DM, DDA, Trakhees or Nakheel, and the completion certificate | Permits, NOCs, new loads or extensions, and regularising unpermitted works |
What We Deliver
- Wind load, uplift and moment checks (ASCE 7, ACI 318)
- Slab load checks for water tanks, cranes and pergolas
- Wall removal assessments and beam design
- Steel connection design and anchoring (Hilti or Fischer)
- AutoCAD drawings, markups and design overlays
- As-built drawing preparation
- Structural reports signed by qualified engineers
Authority Submissions
- Drawing submissions to DM, DDA, Nakheel and Trakhees
- Permits for villa extensions, pergolas and wall removals
- Completion certificates
- Online portal uploads and tracking
- MEP and architectural coordination where needed
- Coordination with fire, gas and utility departments where applicable
Typical Use Cases
| Project type | What it usually needs |
|---|---|
| Wall removal | Site inspection, beam design, then a permit where required |
| Backyard pergola | Wind load and base design, then the developer or authority approval |
| Steel platform in a warehouse | Load calculations, baseplate design and the authority submission |
| Apartment layout change | Partition and structural check, then the DDA or developer submission |
| Mobile crane inside a warehouse | Slab load check |
| Villa regularisation | As-built drawings, calculations and retrospective approval |
Project Examples in Dubai
Wall Removal in Mirdif
On-site inspection and beam sizing by our engineers, then the Dubai Municipality submission. The permit was issued with no revision needed.
Pergola and Extension in Al Furjan (Nakheel)
Wind load and base design by our engineers, with the Nakheel and Trakhees submission handled by us.
Steel Platform in a JAFZA Warehouse
Crane load calculation, baseplate design and deflection analysis, with the full submission package approved by Trakhees after its safety review.
Engineering
Calculations and drawings
Approvals
DM, DDA, Trakhees, Nakheel
Completion
Certificate and handover
Why Clients Choose Us
Speed Where It Matters
Calculations and drawings prepared quickly, and submissions start as soon as the documents are final.
Expertise in Dubai Codes
ACI 318, ASCE 7, DM submission formats and Trakhees and Nakheel technical guidelines.
One Point of Contact
We handle design, drawings and submission, so there is no back-and-forth between teams.
Need a Structural Consultant?
Tell us about your project. We will tell you whether you need engineering only, full approvals, or both, and take it from there.
Structural Consultants in Dubai FAQs
Do I always need a consultant for structural works in Dubai?
Not always. Small jobs such as a wall check or pergola calculation may only need engineering. We will advise you.
Can I start with engineering and move to full submission later?
Yes. Most clients do. We keep all files ready for the authority submission.
Can Structural Solutions submit to DM, DDA, Trakhees or Nakheel?
Yes. We prepare and submit the approval package and follow it through to the completion certificate.
Which codes do you design to?
ACI 318 and ASCE 7, with drawings in the submission format of each authority.
Do you prepare as-built drawings for regularisation?
Yes. We survey the works and prepare as-built drawings and calculations for retrospective approval.