Wall Opening Structural Assessment in Dubai
The assessment answers one question: what can this wall take?
A structural assessment for a wall opening looks at the wall, the slab or beams above, the floors and walls carried, and the supports at each side. It sets out whether an opening is possible, how wide, and what beam, lintel or columns it needs. The assessment is the base for the design and the approval drawings.

Official sources: Dubai Municipality, Dubai Development Authority (DDA)
What we check first
- Wall: Load-bearing or partition
- Structure: Slab, beams, columns above
- Material: Block, concrete or precast
- Opening: Width and position
- Records: As-built drawings or survey
- Route: NOC, then authority
Documents you will need
- Photos of the wall from both sides, and the ceiling above
- Villa or unit number and community or building
- As-built drawings, if you have them
- Title deed and owner ID, or tenancy for shops and offices
Route
How a wall change is approved
The structural check comes first. The NOC and permit follow the area and the property type.
| Step | Approval route | Guides |
|---|---|---|
| Structural check Our engineers | As-built drawings, or a site survey, to confirm whether the wall carries load. | Is my wall load-bearing? |
| Design Structural Solutions | Beam or lintel design, stamped structural calculations and drawings. | — |
| NOC Developer, landlord or building management | Villas in a community: developer NOC. Apartments, offices and shops: building management or landlord NOC. | — |
| Permit The authority for the area | DM, DDA, Trakhees or the area authority, for the structural works. | Wall opening permit |
| Works Your contractor | To the approved drawings, with temporary propping where needed. | — |
| Completion Authority and developer | Inspection and completion of the works. | Wall opening sign-off |
How it works
How it works
1. Send photos
The wall, the ceiling and what you want.
2. Records
As-built drawings, or a survey.
3. Structural check
Load-bearing or not, and what is above.
4. Design
Beam or lintel, stamped calculations.
5. NOC and permit
Developer, landlord or BM, then the authority.
6. Works and completion
Propping, works, inspection.
Related wall questions
What causes problems
- Judging the wall by its thickness
- Ignoring what is on the floor above
- Skipping the site check when drawings are missing
Planning a wall change?
Check the wall first
Send us three things on WhatsApp:
- Photos of the wall and the ceiling above
- Your community or building, and unit number
- What you want to open or remove
Our engineers check whether the wall carries load, design the beam or support and handle the NOC and the permit.
Questions
Questions
What does the assessment look at?
The wall, the loads above and the supports.
Is a site visit needed?
Usually, together with the as-built drawings.
Can the assessment say no?
Yes, if the wall cannot safely take the opening; we suggest alternatives.
How is it used?
For the design, the NOC and the permit.
Can you open the finishes?
A small inspection opening may be needed to see the wall.
How do I contact you?
Contact our engineering team on WhatsApp or call us directly on +971 55 339 4451.
Related guides
