Walls · Structural · Approvals

Wall Opening Beam and Lintel Design in Dubai

The beam over a new opening must be sized for what sits above it.

Every opening in a load-bearing wall needs a beam or lintel designed for the loads above: slab, walls, roof and any finishes. Our engineers calculate the loads, size the steel or concrete beam, check the bearings at each end and the propping during works, and issue stamped calculations and drawings for the NOC and the permit.

What we check first

  • Wall: Load-bearing or partition
  • Structure: Slab, beams, columns above
  • Material: Block, concrete or precast
  • Opening: Width and position
  • Records: As-built drawings or survey
  • Route: Developer or BM, then authority

Documents you will need

  • Photos of the wall from both sides, and the ceiling above
  • Villa or unit number and community or building
  • As-built drawings, if you have them
  • Title deed and owner ID

Route

How a wall change is approved

The structural check comes first. The NOC and permit follow the area and the property type.

StepApproval routeGuides
Structural check
Our engineers
As-built drawings, or a site survey, to confirm whether the wall carries load.Is my wall load-bearing?
Design
Structural Solutions
Beam or lintel design, stamped structural calculations and drawings.Do I need calculations?
NOC
Developer or building management
Villas in a community: developer NOC. Apartments and offices: building management NOC.—
Permit
The authority for the area
DM, DDA, Trakhees or the area authority, for the structural works.Wall opening permit
Works
Your contractor
To the approved drawings, with temporary propping where needed.—
Completion
Authority and developer
Inspection and completion of the works.Wall opening sign-off

How it works

How it works

1. Send photos

The wall, the ceiling and what you want.

2. Records

As-built drawings, or a survey.

3. Structural check

Load-bearing or not, and what is above.

4. Design

Beam or lintel, stamped calculations.

5. NOC and permit

Developer or BM, then the authority.

6. Works and completion

Propping, works, inspection.

Planning a wall change?

Check the wall first

Send us three things on WhatsApp:

  1. Photos of the wall and the ceiling above
  2. Your community or building, and unit number
  3. What you want to open or remove

Our engineers check whether the wall carries load, design the beam or support and handle the NOC and the permit.

Questions

Questions

Steel or concrete beam?

Both are used; we choose what suits the structure and the works.

Can the contractor size the beam?

The beam needs stamped structural calculations for the approval.

Do the beam ends need support?

Yes, the bearings are checked and sometimes new columns are needed.

Is a lintel the same as a beam?

A lintel is a small beam over an opening; it is still designed.

How do I contact you?

Contact our engineering team on WhatsApp or call us directly on +971 55 339 4451.

Related guides

Keep reading