JLT · DMCC · Concordia

JLT As-Built Drawings: Where to Get Them and Who Prepares Them

You need drawings of your JLT unit before a fit-out, for the COC and often when you leave. Here is where they come from.

The short answer

Existing drawings of a JLT unit come from building management or DMCC. If the unit has been changed since, or no drawings exist, we survey it and prepare as-built drawings that match what is built. At the end of a fit-out, the as-built drawings show the works as finished and go with the COC submission to Concordia.

Existing drawingsBuilding management or DMCC
If changedSurvey and redraw
Used forFit-out, COC and handover

What you need to know

  • Before a fit-out: The existing layout is the base for the fit-out drawings.
  • After a fit-out: As-built drawings show the finished works for the COC.
  • When leaving: The landlord or building management may ask for drawings of the unit as handed back.
  • No drawings?: We survey the unit and draw it as built, in PDF and CAD.

Documents you will need

  • Trade licence and lease, or title deed for owners
  • Building management or owners association NOC
  • Existing or as-built drawings of the unit
  • Fit-out drawings, with stamped structural calculations where structure is affected
  • Fire safety drawings where Civil Defence is involved

By situation

When you need as-built drawings

We confirm the route for your tower and unit.

SituationApproval routeGuides
Starting a fit-out
Existing drawings
Base for the design.No drawings?
Finishing a fit-out
As-built drawings
For the Concordia COC.As-built for the COC
End of lease
As handed back
If asked by the landlord.End of lease
Works done earlier
Survey and as-built
Before approval after the works.Works already done

How it works

How we get your JLT approval

1. Unit review

Tower, unit, current layout and the works planned.

2. Existing drawings

From building management or DMCC. If the unit was changed, we survey it and update the as-built drawings.

3. Drawings and calculations

Fit-out drawings, fire safety drawings and stamped structural calculations where needed.

4. Building NOC

Building management or owners association NOC for the works.

5. DMCC via Concordia, then DCD

Concordia reviews the drawings for the DMCC approval; Civil Defence approves fire safety.

6. Inspection and COC

Concordia inspects the finished works and issues the Certificate of Completion.

Who does what

Who approves works in JLT

🏢

Building management

Issues the NOC for works in the tower. It comes first.

Building NOC first →
🏛️

DMCC and Concordia

DMCC approves the fit-out. Concordia, appointed by DMCC, reviews the drawings, inspects the works and issues the COC.

Concordia vs DMCC →
🚒

Dubai Civil Defence

Approves and inspects fire safety changes such as sprinklers, fire alarm and exits.

DCD in JLT →

Why Concordia sends drawings back

  • Building management NOC missing
  • Drawings that do not match the unit as it stands
  • Fire safety changes without DCD approval
  • Structural changes without stamped calculations
  • Works started before approval
  • Contractor not registered with Concordia

Questions

Questions tenants and owners ask

Where do I get drawings of my JLT unit?

From building management or DMCC.

Who prepares as-built drawings?

An engineering consultant surveys the unit and draws it as built; we do this in PDF and CAD.

How are as-built drawings submitted to Concordia?

With the COC documents at the end of the fit-out.

Do I need them when I leave my office?

If the landlord or building management asks for drawings of the unit as handed back.

Related guides

Keep reading