Wind Load Calculations in Dubai
Pergolas, canopies, signs, glass enclosures, windows and cladding: wind is usually the load that decides the design.
Wind load calculations in Dubai check that a structure, its connections and its fixings can safely resist wind pressure and suction at its location and height. They are asked for by developers, authorities, malls and building management for lightweight and exposed structures: pergolas, shade structures, canopies, signboards, glass enclosures, windows and doors, cladding and roof equipment such as solar panels. Our engineers calculate the wind loads, check the members, connections, anchors and supports, and issue a stamped report with the drawings for your NOC or permit.

Official sources: Dubai Municipality · DDA
What we check
- Location: Exposure and height
- Shape: Pressure and suction
- Members: Size and capacity
- Fixings: Anchors and bolts
- Supports: Footings, slab or wall
- Report: Stamped for submission
Documents you will need
- Drawings or a sketch with sizes
- Material and profile details
- Location and height (ground, roof, tower floor)
- Photos of the supporting wall, slab or ground
By structure
Wind load calculations by structure
Each structure has its own guide. We confirm what your submission needs.
| Structure | Approval route | Guides |
|---|---|---|
| Pergolas and shade structures Developer NOC | Members, fixings and footings or roof slab. | Pergola wind load Shade structures |
| Signboards Authority signage permit, mall or landlord | Sign, frame and fixing to the building. | Signage wind load |
| Glass enclosures Developer or building management | Glass, frames and fixings. | Glass enclosure wind load |
| Windows and doors Developer, building or authority | Frames, glass and anchors. | Window and door wind load |
| Canopies and cladding Developer or authority | Panels, brackets and the supporting structure. | Aluminium calculations |
| Solar panels and roof equipment Developer NOC | Frames, ballast or fixings and the roof. | Roof assessment for solar |
How it works
How we prepare your wind load calculations
1. Send us the details
Structure, size, materials and location.
2. Site
Height, exposure and the supporting structure.
3. Wind loads
Pressure and suction on each part.
4. Design checks
Members, connections and fixings.
5. Report
Stamped calculations and drawings.
6. Submission
With your NOC or permit, comments answered.
Related questions
What causes problems
- Fixings not designed
- Supporting wall or slab not checked
- Height and exposure ignored
Need wind load calculations?
Get a stamped report for your submission
Send us three things on WhatsApp:
- Structure and size
- Materials
- Location and height
Our engineers calculate the wind loads, check the fixings and prepare the report.
Questions
Questions
Do I need wind load calculations for a pergola?
Usually yes. Developers ask for stamped calculations that cover wind, members, fixings and footings.
Which structures need wind load calculations?
Lightweight and exposed ones: pergolas, shades, canopies, signs, glass enclosures, windows, cladding and roof equipment.
Does height matter?
Yes. Wind is stronger higher up, so a sign or glass on a tower needs more than one at ground level.
What if a structure was damaged by wind?
We inspect it, check what failed and design the repair or replacement.
What if it was already built without calculations?
Works already built take an as-built route: contact us and we help you accordingly. A fine may apply, depending on the case.
How do I contact you?
Contact our engineering team on WhatsApp or call us directly on +971 55 339 4451.
Related guides
