Column Strengthening Approval (DDA)
Columns that must carry more load, after a new floor, heavier use or a removed support nearby, need strengthening. In DDA areas the column strengthening design goes through the Building Modification route with the specialist stamp.
A column is checked for the load coming down from above, its length and the foundation below it. If it falls short, we design concrete jacketing, steel jacketing or CFRP wrapping, and the design goes to DDA with the strengthening specialist stamp.
Why
Why columns need strengthening
Villas with a new floor, offices with heavy use, car parks and towers with changed layouts.
| Reason | Notes |
|---|---|
| Extra floor or roof structure | More load down the column |
| Change of use | Heavier floors above; see change of use |
| Removed or moved column nearby | Load shifts to the remaining columns |
| Low concrete strength found in tests | Capacity below what is needed |
What we check
What we check on the column
| Check | Why |
|---|---|
| Load from above | Floors, roof, equipment |
| Column length | Slender columns buckle before they crush |
| Foundation below | Must carry the new load too |
| Space around it | Jacketing adds size |
Methods
Column strengthening methods we design
A specialist contractor applies them. The DDA route is on DDA strengthening approval.
| Method | What it does |
|---|---|
| Concrete jacketing | New reinforced concrete around the column |
| Steel jacketing | Steel angles and plates around the column |
| CFRP wrapping | Confinement for higher axial load |
Official sites: DDA | Dubai Building Code
What you need to know
- Load from above first: floors, roof, equipment.
- Specialist stamp on the design.
- No Objection: works start after DDA.
- Damaged? See column restoration.
Documents you will need
- What is planned on the column and why
- As-built drawings, if available
- Photos
How it works
Column strengthening, step by step
1. Assess
Load from above.
2. Design
Column strengthening.
3. Stamp
Specialist.
4. DDA
Approval.
5. Works
Supervised.
Questions
Column strengthening questions
Do I need DDA approval to strengthen a column?
Yes. Structural works on a completed building in a DDA area need the Building Modification approval and the specialist stamp before the works start.
Can a column be made stronger without making it bigger?
CFRP wrapping adds little size. Jacketing adds more. We choose by load and space.
Who can help?
Structural Solutions assesses the structure, designs the strengthening or repair, coordinates the strengthening specialist stamp and submits to DDA as the approved consultant. A specialist contractor carries out the works. Contact our engineering team on WhatsApp or call us directly on +971 55 339 4451.
Related guides
