DDA · Column strengthening · Updated November 2026

Column Strengthening Approval (DDA)

Columns that must carry more load, after a new floor, heavier use or a removed support nearby, need strengthening. In DDA areas the column strengthening design goes through the Building Modification route with the specialist stamp.

A column is checked for the load coming down from above, its length and the foundation below it. If it falls short, we design concrete jacketing, steel jacketing or CFRP wrapping, and the design goes to DDA with the strengthening specialist stamp.

TypicalVillas with a new floor
StampStrengthening specialist
Before worksDDA No Objection

Why

Why columns need strengthening

Villas with a new floor, offices with heavy use, car parks and towers with changed layouts.

ReasonNotes
Extra floor or roof structureMore load down the column
Change of useHeavier floors above; see change of use
Removed or moved column nearbyLoad shifts to the remaining columns
Low concrete strength found in testsCapacity below what is needed

What we check

What we check on the column

CheckWhy
Load from aboveFloors, roof, equipment
Column lengthSlender columns buckle before they crush
Foundation belowMust carry the new load too
Space around itJacketing adds size

Methods

Column strengthening methods we design

A specialist contractor applies them. The DDA route is on DDA strengthening approval.

MethodWhat it does
Concrete jacketingNew reinforced concrete around the column
Steel jacketingSteel angles and plates around the column
CFRP wrappingConfinement for higher axial load

Official sites: DDA | Dubai Building Code

What you need to know

  • Load from above first: floors, roof, equipment.
  • Specialist stamp on the design.
  • No Objection: works start after DDA.
  • Damaged? See column restoration.

Documents you will need

  • What is planned on the column and why
  • As-built drawings, if available
  • Photos

How it works

Column strengthening, step by step

1. Assess

Load from above.

2. Design

Column strengthening.

3. Stamp

Specialist.

4. DDA

Approval.

5. Works

Supervised.

Questions

Column strengthening questions

Do I need DDA approval to strengthen a column?

Yes. Structural works on a completed building in a DDA area need the Building Modification approval and the specialist stamp before the works start.

Can a column be made stronger without making it bigger?

CFRP wrapping adds little size. Jacketing adds more. We choose by load and space.

Who can help?

Structural Solutions assesses the structure, designs the strengthening or repair, coordinates the strengthening specialist stamp and submits to DDA as the approved consultant. A specialist contractor carries out the works. Contact our engineering team on WhatsApp or call us directly on +971 55 339 4451.

Related guides

Keep reading