Value Engineering for Pre-Engineered Steel Buildings in Dubai
Pre-engineered buildings come with a supplier design. We review it.
Pre-engineered steel buildings are designed by the supplier. An independent review checks the loads, the frame, the connections and the foundation reactions against the code and the authority requirements, and compares options. Our engineers review the supplier design and advise before you commit.

Official sources: Dubai Municipality, Dubai Development Authority (DDA), Trakhees
What we check first
- Structure: Steel frame, purlins, bracing
- Loads: Wind, roof, crane, mezzanine
- Code: Design code and authority
- Connections: Bolts, plates, base plates
- Foundations: Reactions and footings
- Approval: Revision if already approved
Documents you will need
- Current structural drawings and calculations
- Architectural layout and building use
- Location and authority (DM, DDA, Trakhees or free zone)
- Steel tonnage or bill of quantities, if available
Route
How it works, step by step
Each project is reviewed first; the route follows the property and the authority.
| Step | Approval route | Guides |
|---|---|---|
| Review Our engineers | The drawings, calculations and the tonnage of the current design. | — |
| Options Structural Solutions | Alternative frames, sections and connections that meet the code. | — |
| Redesign Structural Solutions | Updated drawings and stamped calculations. | — |
| Approval Authority for the area | A revised submission where the design was already approved. | Re-approval |
| Fabrication Your steel contractor | Shop drawings to the approved design. | — |
| Site Contractor | Erection to the approved drawings. | — |
How it works
How it works
1. Send the design
Drawings, calculations, building type.
2. Review
Our engineers check the steel.
3. Options
Where the design can be optimised.
4. Redesign
Drawings and stamped calculations.
5. Approval
Revision where needed.
6. Fabrication
Your contractor builds to it.
Related questions
What causes problems
- Cutting steel without checking the loads
- Changing an approved design without a revision
- Assuming savings before the review
Steel project in Dubai?
Send us the design
Send us three things on WhatsApp:
- Structural drawings or calculations
- Building type and location
- Stage: design, tender or approved
Our engineers review the steel design and tell you where it can be optimised. Savings depend on the project.
Questions
Questions
Can you review a supplier design?
Yes, the drawings and calculations.
Do you design the foundations for a PEB?
Yes, from the supplier reactions.
Is approval still needed?
Yes, the building needs the authority permit.
Can you compare two supplier offers?
Yes, on the structural design.
How do I contact you?
Contact our engineering team on WhatsApp or call us directly on +971 55 339 4451.
Related guides
