Floor load · Server rooms

Server Room Load Approval in Dubai

Server racks, UPS systems and battery cabinets are some of the densest loads in an office. Before a server room goes in, the floor has to be checked. Here is how we do it.

Server room floor load

We take the rack, UPS and battery weights and the room layout, and run a structural analysis of the slab from the as-built drawings. Where needed, we design bases or frames to spread the load, and we check the delivery route and the lift for the heavy units. Raised access floors are included in the check. You receive a full report for building management, the project’s consultant or the authorities.

Heavy itemsRacks, UPS and batteries
Based onThe as-built drawings
You receiveA full report

What we check in a server room

  • Server racks: Rows of point loads
  • UPS: Very dense units
  • Battery cabinets: Heavy over small areas
  • Raised floor: Pedestals on the slab
  • Delivery: Route and lift

Documents you will need

  • Equipment list with weights
  • Room layout
  • As-built drawings, if available

How it works

How the server room check works

1. Item details

Weight, footprint and datasheet.

2. As-built drawings

We obtain or review them.

3. Analysis

Slab capacity against the added load.

4. Load spreading

Steel base or spreader plate and anchoring, if needed.

5. Route and lift

Delivery path and lift capacity.

6. Full report

Detailed analysis for review.

Related guides

Common problems

  • Batteries grouped in one corner
  • Raised floor loads ignored
  • Racks added later without a check

Need a floor load check?

Check the floor before delivery

Send us three things on WhatsApp:

  1. The item, its weight and footprint (datasheet)
  2. The area, the floor and where the item will sit
  3. As-built drawings, if you have them

We run the analysis from the as-built drawings, design the spreader plate and anchoring if needed, check the route and the lift, and send you the full report.

Questions

Server room questions

Does a server room need a floor load check?

Usually, yes. Racks, UPS and batteries are dense loads.

Is the raised floor included?

Yes, the pedestal loads on the slab are part of the check.

Who reviews the report?

Building management, the project’s consultant or the authorities.

How do I contact you?

Contact our engineering team on WhatsApp or call us directly on +971 55 339 4451.

Related guides

Keep reading