Merging Restaurant Units in Dubai: The Full Approval Package
Two units into one restaurant: the wall is only the start.
Merging two restaurant units needs the landlord NOC, a structural check and design for the wall between them, the authority fit-out approval for the merged unit and Civil Defence (DCD). Because the food layout changes, the Dubai Municipality Food Safety layout approval is needed again, with an inspection before opening. Kitchen exhaust, gas and services are shown for the merged unit.

Official sources: Dubai Municipality, Dubai Development Authority (DDA)
What we check first
- Wall: Load-bearing or partition
- Structure: Slab, beams, columns above
- Material: Block, concrete or precast
- Opening: Width and position
- Records: As-built drawings or survey
- Route: NOC, then authority
Documents you will need
- Photos of the wall from both sides, and the ceiling above
- Villa or unit number and community or building
- As-built drawings, if you have them
- Title deed and owner ID, or tenancy for shops and offices
Route
How a wall change is approved
The structural check comes first. The NOC and permit follow the area and the property type.
| Step | Approval route | Guides |
|---|---|---|
| Structural check Our engineers | As-built drawings, or a site survey, to confirm whether the wall carries load. | Is my wall load-bearing? |
| Design Structural Solutions | Beam or lintel design, stamped structural calculations and drawings. | — |
| NOC Developer, landlord or building management | Villas in a community: developer NOC. Apartments, offices and shops: building management or landlord NOC. | — |
| Permit The authority for the area | DM, DDA, Trakhees or the area authority, for the structural works. | Wall opening permit |
| Works Your contractor | To the approved drawings, with temporary propping where needed. | — |
| Completion Authority and developer | Inspection and completion of the works. | Wall opening sign-off |
How it works
How it works
1. Send photos
The wall, the ceiling and what you want.
2. Records
As-built drawings, or a survey.
3. Structural check
Load-bearing or not, and what is above.
4. Design
Beam or lintel, stamped calculations.
5. NOC and permit
Developer, landlord or BM, then the authority.
6. Works and completion
Propping, works, inspection.
Related wall questions
What causes problems
- Opening the wall before the landlord NOC
- Keeping the old food layout approval after the merge
- No fire safety design for the larger unit
Planning a wall change?
Check the wall first
Send us three things on WhatsApp:
- Photos of the wall and the ceiling above
- Your community or building, and unit number
- What you want to open or remove
Our engineers check whether the wall carries load, design the beam or support and handle the NOC and the permit.
Questions
Questions
Is a new Food Safety approval needed?
Yes, the layout changes, so it needs re-approval.
Is DCD needed?
Yes, for the merged unit.
Does the landlord approve first?
Yes.
Can the kitchen move?
Yes, it is shown on the new layout for approval.
Do you handle the full package?
Yes, structure, fit-out, Food Safety and DCD.
How do I contact you?
Contact our engineering team on WhatsApp or call us directly on +971 55 339 4451.
Related guides
